Transgruas Grúas

News

Technical info

Technical info

Technical info

Logotipo Transgruas
DO NOT MISS ANY DETAIL: EXTRA LOW CRANE ASSEMBLING

March 29, 2022


  • Extra low Fassi knuckle boom crane assembling
  • Extra low Fassi knuckle boom crane assembling


We make a meticulous study of all our assemblings and we do find improvements and options that gives our client many advantages.

 

We would like to show  you the "extra low" special assembling we do. They are assemblings with a low profile of only 100mm., when the normally used ones are 160mm./200mm.

 

These kind of assembings have been done with cranes of 60ton/m (a F600) and a 90ton/m (a F950), and they could be done with cranes up to 100ton/m. As the main advantages of this assembling we have the fact of being able to assemble equipments until a height of 3.000mm. and also reduce the body so higher equipments and accessories can be loaded. 

 

All these is done complying with the torsion demands, as the assembling is done of special high elastic resistence steel.

 

 

COMMENTS

  1. JOSE ANTONIO SANZ DIAZ
    ¡¡¡Enhorabuena!!! al equipo de montaje de TRANSGRUAS, felicidades por el gran trabajo que realizáis.
    Sabemos que en determinados montajes es fundamental conseguir un perfil de sobrechasis lo más bajo posible. Nosotros lo hemos hecho en alguna ocasión utilizando acero de alto límite elástico para montaje de F660RA2.28 en cabeza tractora logrando una altura de sobrechasis de 112 mm en la zona de acoplamiento de la quinta rueda. Además acoplamos un sistema de cuatro twist-lock para poder acoplar una caja fija abierta cuando no se use el vehículo como tractora.
    04/04/2022 09:56:33

Related news

NEW MULTITEL PAGLIERO MZ350 AERIAL PLATFORM

March 29, 2022

A 35.3m working height and a 20m. outreach on a 12ton. truck.

SEE MORE

ANOTHER TRANSGRUAS HOMEMADE MACHINERY CARRIER DELIVERED.

March 25, 2022

We make this tailor-made machinery carrier for Euro-Elevación Catalunya.

SEE MORE

ANOTHER MULTITEL AERIAL PLATFORM DELIVERED IN BARCELONA

March 23, 2022

A perfect equipment for our client Hermanos Jairo's gardening works.

SEE MORE

ANOTHER FASSI NUCKLE BOOM CRANE FOR RIPOTRANS: A F315RB.2.28

March 23, 2022

Ripotrans continues to increase its fleet and trusts Transgruas for so.

SEE MORE

POST IAPA: HOW DID THE AWARDS GO?

March 16, 2022

The Multitel Pagliero MZ350 aerial platform was nominated for the last March 10th IAPA awards.

SEE MORE

THE SHT FASSI SYSTEM: WORK IN SILENCE and WITH ZERO EMISSIONS

March 15, 2022

The Smart Hybrid Technology arrives to Fassi.

SEE MORE

THE F315RB KNUCKLE BOOM CRANE INCORPORATES THE NEW FASSI TECHNOLOGY

March 2, 2022

Decagonal extensions design, continuous rotation, flexible tubes between the column and the main boom...all thought out in detail.

SEE MORE

A FASSI F820RA.2.27 FOR THE CONSTRUCTION SECTOR IN IBIZA

March 29, 2022

PITIUSA DE TRANSPORTES CASANOVA ADQUIERES ANOTHER HEAVY RANGE FASSI KNUCKLE BOOM CRANE.

SEE MORE

WE DELIVER TWO UNITS FOR THE TRANSPORT SECTOR

March 28, 2022

Transgrúas colaborates with Hidrasold for these deliveries. 
 
As a result of the collaboration of Marta, our saleswoman, with Hidrasold, we have delivered these two Fassi F235A.2.26 knuckle boom cranes to Tranports...

SEE MORE

A LIGHT RANGE FASSI KNUCKLE BOOM CRANE DELIVERED IN VALENCIA

April 5, 2022

Adrián, our salesman, delivers this F32A.0.23 Fassi crane to Antonio Madolell.

SEE MORE

WHEN WAITING IS NOT AN OPTION!

March 29, 2022

Available accessories on immediate delivery:
Do you need it asap? Just ask for it.

SEE MORE

JEKKO MINICRANES SPX532 or SPX650: A DIFFICULT CHOICE.

March 22, 2022

The most powerful minicrane to pass through an standard door vs the 5tn, 24m outreach and only 1m width model: do not miss any detail.

SEE MORE

The strength of a company with 40 years of experience and the commitment of a family company that works for specialists in more than 10 sectors related to cranes, lifting, transport and biomass machin

App download appstore googleplay