June 8, 2020
Hijos de Froilán Fernández delivers to Correos two Anteo tail lifts, model F3CL.10.
They are two Anteo tail lifts, model F3CL.10, with aluminium plate of 2.100mm. width, and 1.600mm depth, with load brakes, in order to avoid the trolleys move. The load capacity of the cantilev ers is 1.000 kg., and they have a cable remote control.
The client is more than satisfied with the tail lift as well as with the assembling done by Hijos de Froilán Fernández, who a part from the cantilevers assembling, has installed on the rear two upper gates, which together with the cantilevers plates, closes the rear part completely.
We thank the good job done by our representative and the trust of Correos.
June 5, 2020
Within one month, we have delivered the second crane to Procar: A Fassi F95B.0.22 +
Procar SA, who already acquired last Aprol a Fassi F155A.0.24 knuckle boom crane with an open body, has receiv ed now itrs second...
July 15, 2020
Hijos de Froilán Fernandez is in charge of making the bodybuild and mounting of an Anteo tuckawar cantiveler
Our distributor in Ciudad Real does not stop, and here we share with you photos of another great work...
June 22, 2020
All set for the assembling: waiting for the grape harvest season.
Our client Sigma Tecnología, company located in Albacete, lider in the grape harvest sector, to whom we delivered 10 Maxilift ML230.2H cranes...
June 19, 2020
We deliver in our Barcelona's facilities a 6 suction pads Jekko manipulator.
July 27, 2020
The device that allows the crane to be used as an aerial platform (PLE), switching from CRANE to PLE mode with a single command
The EN280: 2015 regulation establishes the safety requirements for mobile personnel lifting...