May 29, 2019
With an an eye set on the future, following the path of digital innovation and mechatronic engineering, introducing applications and technologies that help the operator in his work: here is a summary of all the technological aspects "made in Fassi"
Fassi guides innovation and does so by placing the operator at the centre of its design choices. Digital innovation linked to mechatronics works to facilitate and make the operators’ work even safer through the development of increasingly intuitive interfaces and systems that allow them to communicate with the machine.
The applications and technologies developed internally by Fassi can be activated by remote control or automatically according to specific operating conditions. This shifts the operator's actions to where they are needed, or where the crane lifts or moves. Thanks to the introduction of these innovations, the crane is no longer just a work tool, but has become an extension of the user's will and perception. For example, through a connection and a remote control, the operator now can control the truck with the crane's remote control as well as the machine’s condition and load movements, he can request remote assistance and can open or close the crane. All this can be carried out in maximum safety thanks to sensors that, for example, automatically block the crane booms from coming too close to the truck cab.
INNOVATION FOR FASSI
- The operator is at the centre of design decisions
- Development of increasingly intuitive human-machine interfaces
- Development of advanced systems that allow dialogue with the crane
- Development of systems that control risks
- Development of systems that provide continuous feedback on the condition of the crane
FX-Link. A system developed with the aim of optimising the connectivity between crane and truck. In practice, it controls the truck from the crane's remote control and the state of the crane from the truck's dashboard, developing new integrated command/control functions.
AWC, Automatic Winch Control. Through a network of dedicated wireless sensors, this system detects the telescopic movements of the extensions when the crane’s secondary jib is horizontal to the ground, automatically keeping a constant distance between the pulley between the eyelet at the tip of the crane and the lifting hook.
ACF, Automatic Crane Folding. This new system allows the crane to be opened and closed automatically. For example, it simplifies the return to rest sequence.
CCD, Cabin Collision Detection. The system uses position sensors to monitor the movements of the crane booms, detecting their distance from the truck cab and automatically locking them when they approach it dangerously.
IMC, Integral Machine Control. The digital brain of Fassi cranes which coordinates and manages the best operating conditions (in addition to the crane’s safety devices) through sophisticated electronics, to ensure optimal performance and machine control in relation to the working situations.
GAS, Grabe Automatic Shake. Adjustable, automatic bucket shaking system that allows the bucket to be gradually emptied using the remote control.
FX901, Touch Screen Display. 7" graphic colour display screen with touchscreen technology that allows detailed information on the crane's stabilisation and working conditions to be displayed.
IoC, Internet of Cranes. With this system patented by Fassi, all the cranes equipped with the special device are "online", allowing the operator to count on an always active assistance service that optimises maintenance times and costs.
October 25, 2018
ADC (automatic dynamic control) is a Fassi exclusive device designed by the research & development department
The increase on the demand of cranes efficiency and its complete safe operating, have cause an authentic ...
April 29, 2019
The Jekko range of minicranes on tracks are designed to perform special loading works indoors, in areas of difficult access and small spaces. That is why they are highly technological and innovative cranes.
March 26, 2019
Through the application of mathematical models, Multitel has developed a device that maximizes the lateral working range automatically based on the load of the basket basket and the position of the stabilizers
November 26, 2019
Do not miss video showing the operation of the FX-Link device that allows the total crane-truck interaction
"Drive by Fassi" is a technology resulting from the collaboration between Fassi and Volvo, which allows the...
October 21, 2019
Transgrúas, as a collaborating partner of Ascatravi, actively participates in the different days dedicated to the world of bodywork and transformation of the industrial vehicle
On October 3rd we attended the technical...
July 22, 2019
The technology designed and developed by Fassi to give immediate assistance when the client needs it, summarized in this didactic short video
Fassi service network can increase its efficiency thanks to the "Internet...
June 14, 2019
In paricular, a 20 tn. hooklift delivered to Hermanos Pérez Garrán.