April 29, 2019
The Jekko range of minicranes on tracks are designed to perform special loading works indoors, in areas of difficult access and small spaces. That is why they are highly technological and innovative cranes.
In this post we explain what is JEMMI, acronym in English of "Jekko Man Machine Interface", which is the set of functions developed by Jekko to have a safe and easy to use crane.
BPI: Boom pressure indicator
Electronic gauge based on pressure of the lifting cylinder: it prevent boom overload and crane tipping on SPD and SPB range.
SCI: Stability Control Indicator
Show the position of each outrigger. Available on SPD and SPB range.
LMI: Load & Moment Indicator
Shows the boom position and crane actual/max capacity. Prevents crane overload and tipping: stops boom functions and allows only safe controls. Available on SPX range.
GSC: Geometrical Stability Control
It is the evolution of the SCI for the SPX range. It shows the position and of each outrigger and divide the stability area into coloured working zone. It switch automatically the LMI working chart when swinging into a new zone.
CCI:Crane Carrier Interlock
Locks crane functions when it is not properly stabilized. Locks carrier functions when boom is not correctly stored. Available on SPX range.
A2B: Anti Two Block
Switch that prevents the hook block or load hook to be pulled against the boom head.
DTC: Diagnostic Trouble Code
Fault and Alarms are listed with a code that make troubleshooting service easier and faster.
VW: Virtual Walls
Self aquisition of working space boundaries. Once set the crane works only inside the boundaries. Available on models from SPX527 to SPX 1275 and still under development on SPX312/424.
PPA: Plug & Play Attachment
Attachments as jibs, manipulators, etc. once installed and connected to the main boom are self-detected by the LMI. There in no need for the operator to set the tool, just push enter to confirm. Available on SPX312/424 and still under development on SPX527/1040/1275.
P&C: Pick & Carry
LMI include a working chart on tracks
TH: Tilting Head
The pulley head can be set to 3 different angles. It is used indoor to gain more hook hight. Available on SPX527 only.
RCD: Radio Control Display
The radio remote control is a two way communication one. It receives also information from the crane that are shown on the display. You can see LMI and outriggers page. Available on SPX527-1040-1275
2SW : Speed Winch
The winch is equipped with a 2 displacement hydraulic motor electrically driven. A slow speed will allow max winch capacity and a fast speed will allow only a reduce capacity.
2ST: 2 Speed Tracks
Tracks gearboxes are equipped with a 2 displacement hydraulic motor electrically driven. A slow speed will allow max torque for steering or climbing and a fast speed will allow to drive straight and faster. Available on models SPX 312, SPX 424, SPX 527& SPX 1275.
For further information on Jekko minicranes please contact our sales team at: firstname.lastname@example.org.
February 27, 2019
"We innovate in solutions and have pioneering machinery with excellent maintenance guarantee" - With this mentality which is part of the DNA of Grúas Minguella, the company has incorporated the articulated crawler crane...
February 19, 2019
Jekko plans to present 4 new machiner in the 2019 edition of Bauma, in all the ranges of product that it manufactures: crawler minicranes, minipickers and articulated cranes on crawlers
We are pleased to advance the...
September 16, 2019
Control device for your JEKKO crane at any time and situation with the new telemetry system
With the aim of making it easier for the user to work with the crane, making the most of it to optimize their work, Jekko...
August 9, 2019
We explain the configuration and design of the chassis of the small range of mini crawler crawler Jekko, which allows access to the crane through standard doors
In order to develop a range of cranes suitable for access...
July 25, 2019
The SPX 532 crane is a totally new model that becomes the first crane of a new generation of mini cranes manufactured by Jekko
Jekko has designed this new mini crane as "the most intuitive mini crane in history, with...
May 29, 2019
With an an eye set on the future, following the path of digital innovation and mechatronic engineering, introducing applications and technologies that help the operator in his work: here is a summary of all the technological...