April 8, 2020
As part of the development of automatic control systems that make the use of the crane increasingly safer and more precise, Fassi has developed a new function called Automatic Crane Movement: ACM (Automatic Crane Movement)
The ACM system has been developed mainly to handle waste containers, but it can also have other applications thanks to the automatic control of the verticality of the load during lifting and lowering, on the one hand, and the memorization of rotation and automatic positioning of the load.
How does it work? Through additional sensors mounted on the crane to control the angle of the main and secondary arms, a linear encoder sensor to verify the position of the hydraulic extensions and software for managing the automatic system.
What this device allows is to move the load vertically in a totally controlled way and position it at predefined points. The main goal of the ACM system is to make certain functions delegated to the operator safer: with the control systems and software of the ACM system it is now possible for the operator to lift or lower the vertical load perfectly, without having to use the radio control control levers to maintain verticality during the maneuver. In fact, by activating the selected function, the crane "self-compensates" the movements of the lifting and extension jacks to maintain perfect verticality when raising or lowering the load.
The system can also store the initial lifting point of the load and then activate the automatic rotation maneuver that allows the crane to rotate and reposition the load in the same position where it was raised at the beginning of the cycle.
To better understand the operation of this new device see the video that we have uploaded to our youtube channel.
COMMENTS
Related news
FASSI STABILITY CONTROL: THE BEST PERFORMANCE OF THE CRANE WITH MAXIMUM STABILITY GUARANTEE
February 21, 2020
The latest video dedicated to the stability control system of Fassi FSC / H, FSC / S and FSC / SII has been published on youtube
From the very beginning, one of Fassi’s priorities has been to obtain extraordinary...
NEW FASSI “FX-LINK” SYSTEM (REVIEW)
November 1, 2019
Fassi & Volvo present new connection system between crana/truck to control different functions between them
The goal of our technical blog is to explain to all our customers and machine users, extra information...
WATCH THE DETAILED VIDEO OF FASSI "IoC" (INTERNET OF CRANES)
July 22, 2019
The technology designed and developed by Fassi to give immediate assistance when the client needs it, summarized in this didactic short video
Fassi service network can increase its efficiency thanks to the "Internet...
"CE KIT": THE TECHNICAL SOLUTION TO ADAPT CRANES WITHOUT CE TO COMPLY WITH THE CE REGULATIONS
September 17, 2020
If you have a crane without CE marking, due to age or origin from a non-CE market, at Transgrúas we adapt your crane
The solution is valid for cranes of all brands and consists of the installation of the "moment...
FASSI F345RB: NEW MODEL OF FASSI CRANE OF 33,8 tm LIFTING POWER
June 26, 2020
New crane model on continuous rotation base available in Transgrúas to come and see and learn all its benefits & performance
The new Fassi F345RB belongs to the xe-dynamic series and is equipped with continuous...
WE CARRIED OUT A FASSI CRANE REPAIR COURSE IN OUR DELEGATION IN VITORIA
July 6, 2020
Our after sales team at Transgrúas Madrid, travels to Vitoria to teach a Fassi crane repair course
On June 30, a company in the electrical sector carried out a FASSI crane repair course. It is a company that, throughout...
ANOTHER FASSI KNUCKLE BOOM CRANE FOR PROCAR, S.A. COMPANY
April 29, 2020
We deliver in our Barcelona's facilities a complete equipment: a Fassi F155A.0.24 knuckle boom crane + an open body.
Our loyal clietn Procar, S.A., a GAMMA construction materials chain, located in Barcelona, has...
RASECAR DELIVERS A MEDIUM RANGE FASSI KNUCKLE BOOM CRANE
April 27, 2020
It is a Fassi F165A.2.25, with a load capacity of 16,11 Ton/mt.
OUR REPRESENTATIVE FROM LAS PALMAS DELIVERS AN ANTEO TAIL LIFT
April 23, 2020
Hidráulica Cardona, SL delivers to SPAR supermarkets a 1.000 kg. capacity ANTEO tail lift.
ANOTHER JEKKO MINICRANE FOR GRÚAS GARRO
April 21, 2020
Our client from Guipúzcoa adquires its second Jekko: a minicrane SPX 536
The company, specialist in elevation and transport sectors, with more than 50 years of experience in the market, has chosen in this occasion...
A FASSI F365RA.2.28 DELIVERED BY OUR REPRESENTATIVE FROM PALMA DE MALLORCA
April 8, 2020
Carrocerías Francisco delivers in his facilities a complete equipment, a Fassi F365RA.2.28 + body.
The strength of a company with 40 years of experience and the commitment of a family company that works for specialists in more than 10 sectors related to cranes, lifting, transport and biomass machin