January 21, 2020
Prior to reviewing a used machine it is essential that it is thoughly clean, for our technical team to check everything properly
As a part of our service of "integral reconditioning" of used machins (cranes, accessories, bodies, etc.), in Transgrúas we have an industrial laundry where we can thoroughly wash the material at arrival. It is an approved high pressure industrial installation, which allows the removal of grease and dirt from the equipment, before putting it on the bench for reviewing and testing. We are also able to wash accessories and components of all kinds.
It must be said that, in compliance with the requirements of waste management, the laundry has a system of purification of wastewater and hydrocarbons.
COMMENTS
Related news
ENGINEERING & INSTALLATION APPROVEMENT DEPARTMENT AT TRANSGRUAS, THE LAST STEP FOR DELIVERY
August 12, 2019
Meet our engineering staff: they take care of approving the installations, bodybuilindg and vehicle transformations we carry out for our customers
The last step in the installation or transformation of any kind that...
FIRST FASSI CRANE FOR TRANSPORTES LOSADA, SA
January 15, 2020
It is a heavy range crane, a Fassi F395RA.2.25 xe-dynamic.
FASSI F110A.23 CRANE: CHANGING IT OF TRUCK AND MOUNTING POSITION
November 18, 2020
Used crane dismounting form old truck and fitting on a new one, with new bodywork & leglization
On many occasions the useful life of the crane exceeds that of the truck, among other things because as a general...
THE FIRST ANTEO F4RE.17 TAIL LIFT ARRIVES TO TRANSGRÚAS
January 30, 2020
We deliver the new 1.700 Kg. Anteo model.
OUR CLIENT ENCOFRADOS CASTELL COUNTS ONCE MORE WITH TRANSGRÚAS IN ORDER TO INCREASE ITS FLEET
January 27, 2020
Once more, our client has increased its fleet with a compelt equipment: a Fassi crane + a fixed body.
WE DELIVER ANOTHER FASSI/MARREL HOOKLIFT
January 22, 2020
Our client, an excavation company located in Barcelona, chose a AL26 model
Without any doubt, it is one of the Fassi/Marrel flagship product. The AL26 hooklift, has a load capacity of 26 ton., which allows the user...
WE MAKE ANOTHER BODY and ANOTHER ASSEMBLY, IN THIS CASE of A FASSI F235ACXP.25
January 13, 2020
Another client who needs an assembly, and who completes its equipment with one of ours tailor-made bodies.
The company Instalaciones y Transformaciones Eléctricas Europeas, which is dedicated to the electrical...
The strength of a company with 40 years of experience and the commitment of a family company that works for specialists in more than 10 sectors related to cranes, lifting, transport and biomass machin