June 27, 2019
ONE-SCOPIC, the most revolutionary suspension technology in the trailers industry, patented by De Angelis is the result of the experience of one of the eldest European trailer manufacturers, with more than 100 years of activity.
Compared to similar suspension systems, ONE-SCOPIC is currently the lightest and most compact solution on the market, which also offers two additional competitive advantages that make it especially suitable for installation on De Angelis trailers:
- The suspension always works vertically at any height: this feature allows to avoid the variation of track and camber of the tires, typical of McPherson and Multilink solutions (applied to the chassis of semi-trailers have upper and lower arms of different sizes).
- Angle of rotation: up to 62 ° (with load plane of 2.55 m). This impressive result today can only be achieved by oscillating suspensions, but only with a load plane of more than 2.75 m or with steering axles connected with rotating plates (but with a much higher load plane)
ONE-SCOPIC is available in the following versions:
One5: maximum capacity of 5 t (10 t per axis line). The first One5 were installed in 2010. Since then they have covered more than 700,000 km and were always reliable and virtually maintenance-free.
One6: maximum capacity of 6 t (12 t per shaft line). This reinforced suspension is based on the technology and patent One5. The high quality materials used, the chrome treatments and the use of high strength steels welded with special techniques guarantee extreme strength and total reliability and operability for intensive use also in extreme temperatures (-40 ° C / + 70 ° C ) and in "dirty" environments (mud, sand, dust, salt)
Both models are available in the following versions:
This technology is also available for mounting on other brands of semi-trailers, as it is a technology developed and thought as a global solution to problems common to the sector of special transport vehicles. De Angelis has developed and patented a complete program of technological solutions that has made available to different manufacturers.
February 11, 2019
Introducing new De Angelis special vehicle: flat 2 axle platform designed for 4x2 or 6x4 trucks with rear crane
This is a special vehicle with telescopic chassis, wich includes a progessive steering hydraulic system on...
July 29, 2019
We have deliver to ELAMA EXKABAZIOAK ETA GARRAIOAK S.L. a fixed semi-low loader
The excavation company, located in Guipúzcoa has adquired a De Angelis 3S3 RTG semi-low loader. It is a 3 axles equipment, with a...
January 29, 2020
Thanks to the great competitiveness and demand of the Spanish crane operators and our determination to offer the best possible crane to each client, we can announce the improvements incorporated to the Fassi cranes in the...