August 23, 2016
Next September at the fair in Hannover (Germany), the 66th Commercial Vehicle Show will take place. The IAA Commercial Vehicles is special because practically all the suppliers are represented alongside the manufacturers. The IAA is therefore the world’s only mobility fair which represents the entire commercial vehicle industry along the whole value-added chain, providing the best conditions for...
August 22, 2016
On the occasion of the Lastbil trade fair, one of the most popular industrial vehicle expositions in Europe, which will take place at Elmia in Sweden at the end of August, Fassi will be presenting two F545RA cranes, both versions with 6 hydraulic extensions with a lifting capacity of 47 t/m and with a maximum hydraulic outreach of over 16 m. One of these cranes (fitted on the Fassi demo semitrailer)...
August 15, 2016
The summer has begun but in Transgruas we do not close at all over the holiday season, and remain opened and working in our usual schedule: from 8 to 13:30 h and from 15 to 18:30 h.
July 12, 2016
Grúa Katillu, a company founded in 1951, located in Bask Country regios (north of Spain), specializing in the transport of heavy machinery, has purchased during the first half of the year four electric cranes type "pick and carry" for the movement of machinery in indoor enclosures where the use of cranes with diesel engine is not allowed.
July 11, 2016
Logística y Transportes LDR is a Madrid-based company specializing in national, international transport and logistics worldwide. Among the services it offers: crane transport, service with full loads and groupage trailer, express service with van, etc.
July 7, 2016
Pezzolato has developed a logs clamping system, by a special hydraulic system with toothed chain, wich enrolls the logs, even in cases of wood pieces with different diameters ensuring the maximum wood clamping during the cutting phase.
July 6, 2016
Fassi brings innovation, quality and performance to its products by using advanced materials from leading steel manufacturers. In its new crane model F2150RAL, Fassi chose to use Strenx 1100 and Strenx 900 from SSAB in the lifting arms and crane booms. The result was a revolution in heavy-weight knuckle boom cranes, which can now be installed on 4-axle trucks.
June 29, 2016
Tomorrow is the kick off day of the 4th edition of the fair Galiforest, an appointment already recognized as one of the important meetings of the forestry sector in Spain.
June 21, 2016
Among the services we offer is the manufacturing of bodies and dumpers for trucks. In this case, we have manufactured a tautliner body with sliding roof and pillars of dimension: 8700 x 2550
June 20, 2016
At Transgrúas' workshop in Barcelona we have just finished the mounting of the largest FASSI crane that can be fitted on 3 axles truck: a FASSI F545RA.2.26 xe-dynamic. This is a somewhat special assembly because, in order to have a tough overchassis and yet not exceed the overall height, we decided to make a false framewith double tubular beam, of the "sandwich" type, closing the overchasis closing...